370TSH
Plastik Enjeksiyon Makinaları sektöründe bilgi birikimine, uluslararası iş deneyimi ve disiplinine sahip, ilgili standartların, teknik şartnamelerin, yasal ve idari mevzuatların gerekliliklerini yerine getiren merkez kadrosu ile kaliteli ve ekonomik hizmet sunarak müşteri beklentilerine eksiksiz cevap vermektir.
İndirilebilir Dökümanlar
SONLY High Speed Catalog
370TSHbuket makina
SONLY HIGH SPEED SERIES
| U370TSH | Unit | A |
| INJECTION UNIT | ||
| SCREW DIAMETER | mm | 40 |
| SCREW L/D RATIO | L/D | 26.4 |
| SHOT VOLUME(THEORETICAL) | cm3 | 234.7 |
| INJECTION RATE | 632.7 | |
| INJECTION PRESSURE | Mpa | 191.1 |
| SCREW SPEED | rpm | 350 |
| SHOT WEIGHT(THEORETICAL)(PET) | g | 214 |
| SHOT WEIGHT(THEORETICAL)(PET) | oz | 7.549 |
| INJECTION SPEED | mm/s | 500 |
| INJECTION SPEED (OPTIONAL) | mm/s | 800 |
| CLAMPING UNIT | ||
| CLAMPING FORCE | Kn | 3700 |
| OPEN STROKE | mm | 660 |
| SPACE BETWEEN TIE BARS(W*H) | mm | 685*685 |
| MAX.MOULD HEIGHT | mm | 660 |
| MIN.MOULD HEIGHT | mm | 210 |
| EJECTOR STROKE | mm | 170 |
| EJECTOR FORCE | Kn | 90 |
| EJECTOR NUMBER | 12+1 | |
| DIAMETER OF CLAMPING ROD | mm | 140 |
| OTHERS | ||
| SYSTEM PRESSURE | Mpa | 16 |
| HEATER POWER | Kw | 24.7 |
| OILTANK CAPACITY | L | 600 |
| MACHINE WEIGHT | Ton | 14 |
| BOUNDARY DIMENSION(L*W*H) | m | 7.3*1.8*2.46 |
| SERVO DRIVER CAPACITY | Kw | 55 + 55 |
.jpg)
450TSHbuket makina
SONLY HIGH SPEED SERIES
| U400TSH | Unit | A |
| INJECTION UNIT | ||
| SCREW DIAMETER | mm | 45 |
| SCREW L/D RATIO | L/D | 25.5 |
| SHOT VOLUME(THEORETICAL) | cm3 | 297 |
| INJECTION RATE | 765.3 | |
| INJECTION PRESSURE | Mpa | 180.2 |
| SCREW SPEED | rpm | 350 |
| SHOT WEIGHT(THEORETICAL)(PET) | g | 271 |
| SHOT WEIGHT(THEORETICAL)(PET) | oz | 9.559 |
| INJECTION SPEED | mm/s | 500 |
| INJECTION SPEED (OPTIONAL) | mm/s | 800 |
| CLAMPING UNIT | ||
| CLAMPING FORCE | Kn | 4500 |
| OPEN STROKE | mm | 740 |
| SPACE BETWEEN TIE BARS(W*H) | mm | 765*765 |
| MAX.MOULD HEIGHT | mm | 780 |
| MIN.MOULD HEIGHT | mm | 280 |
| EJECTOR STROKE | mm | 170 |
| EJECTOR FORCE | Kn | 90 |
| EJECTOR NUMBER | 12+1 | |
| DIAMETER OF CLAMPING ROD | mm | 150 |
| OTHERS | ||
| SYSTEM PRESSURE | Mpa | 16 |
| HEATER POWER | Kw | 27 |
| OILTANK CAPACITY | L | 600 |
| MACHINE WEIGHT | Ton | 20 |
| BOUNDARY DIMENSION(L*W*H) | m | 8.0*1.8*2.46 |
| SERVO DRIVER CAPACITY | Kw | 55 + 55 |
.jpg)